ORD2221 is a 13mm general purpose miniature single contact hermetically sealed reed switch for loads less than 100 Volts. The reed contacts are off-set from the center line. This reed switch is identical to ORD221 but has longer terminals, 56.7mm compared to 44.2mm Pull-in 10-30 AT, Drop-out minimum 5 AT. Contact rated for 10 Watts with Rhodium (Rh) contacts engineered for long life. Very low contact resistance (CR) less than 100mΩ. Can switch or carry as low as 10 nano-Volts (10-9 Volts) without signal loss. Can switch or carry as low as 1 femt-Amp (10-15 Amps) without signal loss. Electrostatic Capacitance is less than 0.3 pF. Consumes no power in open position. Insulation Resistance is above 1 giga-ohm (109 Ω).
Operation Temperatures: -55ËšC (-67ËšF) to +100ËšC (212ËšF). Tolerant of harsh environments including salt spray, water, humidity, gaseous & chemical fumes, oil, fuel, and dust-laden atmospheres. Shock resistant above 20Gs.
Reed-Rex can custom Trim and Form OKI reed switch terminals to meet your precise requirements. Provide us with a drawing of your custom terminal configuration and we will provide a quote to safely modify the terminals.
https://reed-rex.com/wp-content/uploads/2022/10/ORD2221-Datasheet.pdf
